Hydrogenation of ethyl esters of 4-phenyl-and (2-furyl)-substituted 2,4-dioxobutyric acids at palladium black

The hydrogenation of ethyl 4-R-2,4-dioxobutyrates (R = phenyl, 2-furyl) at 5% Pt/Al₂O₃ catalyst, modified with cinchonidine, and at palladium black was investigated. The former had low activity under the conditions we tested. The main products during the hydrogenation of these compounds at palladium black are ethyl 4-R-2-hydroxy-4-oxobutyrates. The yield of the phenyl derivative amounts to 68.5%, while the yield of the corresponding 2-furyl derivative amounts to 97%. In the last case ethyl 2-hydroxy-4-oxo-4-(2-tetrahydrofuryl)butyrate was detected as impurity. The optimum conditions for the formation of ethyl 2-hydroxy-4-phenylbutyrate (yield 88.2%) were determined. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 655–659, May, 2006.     

（PdCl2—PVP）／Al2O3催化剂中Pd状态的探讨

氯化钯先锚定在聚乙烯吡咯烷酮上后进一步负载到Al_2O_3上所制的催化剂[简称(PdCl_2-PVP)/Al_2O_3]是一种活性、选择性高,稳定性好的烯烃、二烯烃和多烯烃加氢催化剂。本文结合加氢反应,使用XPS、FT-IR、电镜及用CO为探针的FT-IR,对这种催化剂进行了考察。实验说明,在这种催化剂中,钯的价态是在0—2之间。红外光谱在486cm~(-1)处有一微弱的小峰,说明存在Pd—N的配位键。催化剂中钯含量低时(0.2wt％)稳定性好,不吸附CO,活性中心是络合钯原子;当钯含量较高时(0.7wt％),催化剂的初活性虽不低,稳定性却较差,这种催化剂能吸附CO,IR谱图上仅在1919cm~(-1)处有CO桥式吸附态的伸缩振动。表明除络合钯原子外,还有聚集的钯金属存在。FT-IR尚表明,PVP在Al_2O_3上可能并非单纯的物理吸附。电镜结果表明,PVP在Al_2O_3上呈30—70(?)的微球状,(PdCl_2-PVP)/Al)_2O_3上的(PdCl_2-PVP)亦呈微球状,与前者无明显区别,这种催化剂中其活性中心是络合钯原子。     

About compensation effect by thermal decomposition of some catalyst precursors

Summary In order to obtain catalysts, the thermal decomposition of the precursors is a compulsory step. However, kinetic analysis of the decomposition data obtained under non-isothermal conditions lead very seldom to the intimate reaction mechanism. There is also a lack of information because in non-isothermal kinetics, the compensation effect, is rather a rule and unfortunately a source of debate. In order to discriminate between these processes, and the influence of conversion, respectively temperature on the reaction rate, the NPK (non-parametric kinetic - Sempere and Nomen) method was used. This method is based on the singular value decomposition algorithm (SVD) applied on the matrix of reaction rate at corresponding conversion and temperature. This method allows a less speculative determination of the conversion functions and of the kinetic parameters.     

以1,1,1-三(N-甲基-N_苯基氨基羰甲氧甲基)丙烷为载体的钙离子选择电极

报道了以三脚架化合物1,1,1_三 (N_甲基_N_苯基氨基羰甲氧甲基 )丙烷 (TMPP)为载体的钙离子选择电极的研制;探讨了增塑剂、载体浓度、pH等因素对电极性能的影响 ;结果表明电极对钙离子有较好的近能斯特响应 ,相应的斜率为27.6 mV/pcCa2+ ,线性响应范围为5×10-5 ～5×10-2 mol/L,检出限为2.3×10-5mol/L ;电极在pH4～13范围内具有强的抗干扰能力 ,并具有很好的重复性和稳定性 ;该电极作为钙离子选择电极 ,用于乳酸钙口服液中钙含量的测定 ,取得了满意的结果     

离子敏感场效应晶体管及其应用

离子敏感场效应晶体管具有若干不同于寻常传感器的特点：超小型、全固态、集成化和自身阻抗变换等。它是一种很有发展前途的传感器。本文了讨论了离子敏感场效应晶体管的分类、结构和性能；评述了１９８９年以来其在临床医学和流动注射分析等方面的应用。引参考文献６７篇。     

富氧条件下Fe-Mn/Beta选择性催化丙烯还原氮氧化物

以Beta分子筛为载体，采用等体积浸渍法制备Fe-Mn/Beta催化剂，并对其在富氧条件下丙烯选择性催化还原NO性能进行了研究。通过N₂吸附-脱附、X射线衍射（XRD）、X射线光电子能谱（XPS）、透射电子显微镜（TEM）、程序升温还原（H₂-TPR）和原位漫反射傅里叶变换红外光谱（in-situ DRIFTS）等研究手段对催化剂进行表征，考察Mn组分对催化剂的物理化学性质、C₃H₆-SCR反应活性和反应中间产物的影响。结果表明，引入Mn物种可以显著提高Fe-Mn/Beta催化剂的低温催化活性，1.5Fe1.0Mn/Beta催化剂NO还原效率350℃最高可达99.4%，在250-400℃反应温度下显示出很高的反应活性和N₂选择性。原位红外光谱研究表明，分子筛离子交换位上孤立的铁离子是丙烯选择性氧化的主要活性位，分散良好的MnO₂物种不能提高催化剂对丙烯的活化能力，但有助于促进形成NO₂吸附物种，从而提升了Fe-Mn/Beta催化剂的低温C₃H₆-SCR性能。经高温水热老化处理后，Fe-Mn/Beta催化剂脱硝活性明显下降，这与孤立的Fe³⁺离子迁移形成Fe_xO_y团聚物种有关。     

氮杂冠醚研究Ⅶ、双仲胺型氮杂冠醚对过渡金属离子的选择性萃取作用

合成了五种新型双仲胺型氦杂冠醚，研究了它们对过渡金属离子进行液—液萃取，并用原子吸收法测定其浓度。实验结果表明：这类冠醚对Ａｇ￣＋、Ｐｄ￣（２＋）、和Ｐｔ￣（４＋）等贵金属离子有较强的选择配位性能，对选择性分离这些金属离子有重要的意义。     

原位漫反射红外光谱法研究SO2对Ag/Al2O3选择性催化丙烯还原NOx反应的影响

 以Ag/Al2O3为催化剂,采用原位漫反射傅里叶变换红外光谱法研究了SO2对C3H6选择性还原NOx反应的影响. 结果表明, SO2在催化剂表面转化为硫酸盐,并且随着硫酸盐累积量的增加,其主要红外特征吸收峰由低波数向高波数漂移. 高浓度表面硫酸盐的存在不仅抑制了催化剂表面硝酸盐的生成,而且抑制了硝酸盐与表面烯醇式物种(RCH=CH-O-)或乙酸盐物种进一步反应,生成活泼的反应中间体异氰酸酯(-NCO), 这是导致Ag/Al2O3催化剂上C3H6选择性还原NOx活性降低的主要原因.     

电极法测定废水中氨氮

介绍了采用电极法测定废水中氨氮时,以吹气法代替蒸馏法对废水水样进行预处理,简化了水样预处理的程序,样品中氨氮的释出率可达90%,加标回收率在60%-98.8%之间。对两种废水样各分析8次,得出其RSD值均小于5%。按3倍标准偏差计算方法的检出限为0.008 mg.L-1。定量测定的最高值为350 mg.L-1。     

Liquid-Phase Hydrogenation of Chloronitrobenzene Over Pt-Sn-B Amorphous Catalyst Supported by Carbon Nanotubes

The Pt-Sn-B/carbon nanotubes (CNTs) catalyst was prepared by impregnation-chemical reduction method. Its catalytic performance was evaluated by liquid-phase hydrogenation of chloronitrobenzene (CNB). The results showed that the catalyst had higher catalytic performance than common hydrogenation catalysts. The conversion of CNB could reach 99.9%, and the dechlorination of chloroaniline (CAN) was less than 1.9% when catalyzed by Pt-Sn-B/CNTs and more than 8.0% when catalyzed by common hydrogenation catalysts. X-ray diffraction and selected area electron diffraction analysis showed that Pt-Sn-B/CNTs had an amorphous alloy structure that can improve catalytic performance. Transmission electron micrograph image showed that the catalyst particles were highly distributed on the surface of CNTs. The hydrodechlorination of CNB was mainly affected by the unique structure of CNTs and the nature of the amorphous metals on the surface of CNTs. The relationship between the interaction of CNTs and amorphous metals and the catalytic performance of the catalyst is also discussed. Translated from the Chinese Journal of Catalysis, 2005, 26(3) (in Chinese)